With a hot brew to the left and a warm mouse to the right, I’m ready to reflect on the last ten days as the Capo sits outside soaking up the morning Abruzzo sun. After the hiccup at 138 miles the remainder of the 3,000 miles went perfectly, not one low-volt drama in sight. Mind you, that is with a new YTX14H-BS battery in the bike since last Thursday!
That same morning she’d sailed through her MOT with a clean sheet at 120,861 miles and now reads 122,135 miles at journeys end. Waiting in the panniers is a new Aprilia 150A starter solenoid (AP81129275) ordered online 
from Aprilia performance (UK) and deliver in 48Hrs which is great service, also a beautifully made power/ground cable kit from John Walker who pulled out the stops to make sure the kit reached me before we departed for Europe. More on this later.
So on reflection, what next for the dear old Capo? Well I’ll install the solenoid and cables over the next week or so and dig out the rear wheel/sprocket carrier bearings and seals, since a dull drone can be heard from the back wheel at about 50-70mph – and is getting steadily louder. There’s 
no play or sign of rust near the seal, but my guess is that one of the bearings is on the way out, so best do a touch of pre-emptive maintenance I think. 😀
Highs and lows of the trip …… low, the DVSA. I can’t and don’t want to say anything on that front …… the high, yesterday afternoon, slicing through the late afternoon A14 traffic side by side with a new gen Caponord also two-up. We kept each other company for 20 minutes or so until he peeled off for Rimini, big smiles and waves all round! Great fun!!
And so, waffle over, without further adoo let the spanner twiddling begin! 😯
